Texas X Riders
Tech Talk => The Garage => Topic started by: Speedyloco on April 25, 2015, 09:02:06 PM
-
I finally got my vtx. Picked up a stock '06 1300r with 7000 miles for a great price. started and ran fine for the first couple of weeks with the usual cold start issue I've read about on the boards.
Took my daughter for a short 30min ride and it started cutting out in second gear a few blocks from the house on the way home. I dropped to first and had to really work the clutch and barely roll on throttle to keep it running. adding choke made it worse. Stopped at a neighbor's house and let it set for about 20 min, started back up without issue and made it about about 4 blocks before it did it again.
Bike is still stock and I ran a can of sea foam through the first two tanks. Any ideas? ???
-
Hang on. Someone will give you some ideas. Must of us have been out of town for the BBT annul meet up so you'll get a reply.
-
Two things to check.
1. Vacuum lines, make sure there all connected, if they are check for cracks in the lines.
2. Under your seat you will see a black box with two rows of wires, check to make sure none on the wires have broken. I has a similar problem way back and it was a black wire to the far left on bottom row, you will have to pull the box to make sure all wires are in tack.
I replied this once, but for some reason I didn't see it, so here it is again, hope it helps.
If you still have a problem let us know, and we will try something else.
-
and check the tightness of your battery terminals.
-
Sounds like a fuel filter issue.
-
The 1800 had a ground issue. You might be having one as well. Check out this site for reference.
http://tech.bareasschoppers.com/electrical/ground-fix-for-vtx-1800/ (http://tech.bareasschoppers.com/electrical/ground-fix-for-vtx-1800/)